This is where you’ll find ideas and possibilities to inspire your next project. See what has been created for venues similar to yours, or view projects for completely different structures. And if you find an integrator whose work you like, you can get in touch with them for their assistance. As with all sections of AV Connect, check back often because we’re constantly updating.
BROWSE CASE STUDIES
Meeting Rooms Case Study
Oregon Convention Center Case Study
The Oregon Convention Center breaks new ground and barriers with an AV system from Sparling and Delta AV (now CompView).
Sparling, Inc.
Michael Shafer, Principal of Sparling's Audiovisual group, headquartered in Seattle, led the system design team.
DeltaAV (now CompView).
The Portland-based firm, one of the Northwest's premier AV companies, partnered with Sparling for the installation and engineering.
CHALLENGE
At a million square feet, the LEED-certified Oregon Convention Center is one of the biggest in the western United States. The $116 million, 407,500 sq. ft. expansion project demanded an AV system as flexible as the architecture itself. For example, the four exhibit halls and movable walls can be configured from 30,000 to 255,000 square feet of exhibit space. Over 100,000 additional square feet are divisible into 32 conference rooms and eight ballrooms. The new system had to integrate with the existing facility and 10-year-old system, and adapt to future needs.
SOLUTION
Previously, major systems might include a networked component as a subsystem, but in this pioneering installation, the network is the system – a marriage of computer network and digital audio. The entire building is tied together over LAN, which enables the AV team to incorporate audio, video and control in any configuration. The system uses very little copper. It's all part of the networked media system, which makes any RJ45 data jack an A/V I/O.
Digital audio and control information comprise two primary networks. The audio component is based around Biamp's Audia system, which handles all signal processing and routing system-wide, and distributed over CobraNet® using QSC's RAVE. Control information is shared over standard Ethernet. Cisco switches tie all data ports together, allowing any port to take on any programmed function. Analog-to-digital transfer links the existing system to the new via fiber optics. The new system sees and distributes the old system as an audio source. Video patch bays and tie lines are built in to provide for easy connectivity.
“The Biamp Audia units play a crucial role. They cover compression and limiting, speaker delays and audio distribution throughout all zones in the entire venue. We're using them in place of a traditional mixer, as well as for room combining, mixing and auto mixing of mics, and input and output gain control. Pretty much everything.”
- Mark Gottwig, President, DeltaAV (now CompView)
The Oregon Convention Center.
- SYSTEM COMPONENTS
- Audia® software
- 17 BIAMP Audia DSP devices, in 8 x 8, 4 x 12, and 12 x 4 configurations
- 25 custom portable rack boxes, with analog I/O panels connected to Rane NM84 8- channel CobraNet® transceivers
- QSC RAVE CobraNet transceivers
- 9 Cisco edge switches; 1 Cisco core switch
- 27 QSC four-channel CX204V amps
- 240 Community R5-66T loudspeakers
- 64 JBL 2152H units
- 166 JBL Control 26CT ceiling speakers
- 6 installed Crestron touch panels
- 2 portable Crestron touch panels
SYSTEM SPECIFICS
Twenty-five custom portable rack boxes, equipped with analog I/O panels connected to Rane NM84 eight channel CobraNet transceivers, can be set up anywhere. QSC RAVE CobraNet transceivers provide additional I/O. The boxes feed digital audio to a matrix of 17 BIAMP Audia DSP devices, in 8 x 8, 4 x 12, and 12 x 4 configurations, which feed directly to an extensive 70Vdistributed system running a total of 27 QSC four-channel CX204V amps. A combination of almost 500 speakers handles the sound, based on area and usage.
To control the system, the Audia units are configured to define a setup and a zone of operation for every input and output. Portable and/or installed Crestron touch panels facilitate control from virtually anywhere in the venue, along with PC workstations and laptops. The Audia units' room combining features are used to create virtual "systems", with multiple Audia units in multiple locations, represented on a single screen. The Crestron units store thousands of cataloged presets and download chosen settings to the Audia units on demand. By pulling up a preset and sending it to the Audias, an AV tech can set up a room in minutes.
CONCLUSIONS
Biamp's close partnership with the consultants and integrators helped create many breakthroughs in flexible system design. The new Audia-based system saves resources and improves quality by eliminating "miles" of copper wire, as well as problems with ground loops and other noise. Audia allows for a single platform operating on a single network, with the potential to easily expand. The Convention Center's AV system is not only ahead of its time; it's also built for the future. For example, Audia's multiple levels of password protection allow new levels of access to be defined as the number of users grows.
“We worked really closely with BIAMP, who added firmware features to accommodate what we were trying to do. A lot of what they came up with was incorporated into subsequent builds of their software, so it was beneficial for everyone.”
- Jeff Overbo, Project Manager, DeltaAV (now CompView)
Are you an integrator? Click here to submit your installation stories and get your work seen.